netTALK DUO WiFi Setup Guide – Android

1. Activate your Device

1. Locate your username and password inside of the box.
2. Go to www.nettalk.com/activate and follow the activation instructions to activate your netTALK DUO WiFi.

2. Connect your Devices

1. Connect your phone to the netTALK DUO WiFi’s phone jack.
2. Connect your network router to the netTALK DUO WiFi’s Ethernet port using the supplied Ethernet cable.
3. Connect the netTALK DUO WiFi to a power outlet using the USB cable and A/C adapter supplied.
4. The light on the netTALK DUO WiFi will blink orange while it registers to our calling system.
5. After a few seconds, the light will turn green and your phone will ring once.

3. Download and Install the “DUO WiFi Scanner” for Android

1. Go the the Google Play market or the Amazon App Store for Android and download the DUO WiFi Scanner.
   
   DUO WiFi Scanner – Google Play:
   http://goo.gl/MDHPs
   
   DUO WiFi Scanner – Amazon App Store for Android:
   http://goo.gl/NxXGQ
   
   Advanced Users – Download the APK:
   http://goo.gl/ltsSM
2. After it’s installed, open the application by tapping the “DUO WiFi Scanner” icon on your Android desktop.
   (Icon is pictured below)
   

4. Run the “DUO WiFi Scanner”

1. The WiFi Scanner will automatically detect the wireless network your smartphone is connected to and search for your netTALK DUO WiFi on that network.
   
   
2. 
   If the DUO WiFi Scanner cannot find your netTALK DUO WiFi, then refer to the troubleshooting tips at the end of this guide.
   
   
3. 
   If your netTALK DUO WiFi is found, you will be entered into “Automatic Setup”.
   
   Select the name of the wireless network you want the netTALK DUO WiFi to use for calling.
   
   
   
   Enter your wireless network password.
   
   
   
   Tap the “Save Settings” button.
   
   
4. 
   If the settings are successfully saved you will see the message “DUO WiFi Configured”.
   
   Your DUO WiFi will be reset and the connected phone will ring once.
   
   If your phone rings, then you have successfully configured your netTALK DUO WiFi with your wireless network.
   
   
5. 
   Tap the “Exit” button to close the DUO WiFi Scanner.

5. Get Ready to Make Calls Over WiFi

1. Disconnect all cables from the netTALK DUO WiFi.
2. Move your phone and netTALK DUO WiFi to the location you prefer.
3. Connect your phone to the netTALK DUO WiFi.
4. Connect the netTALK DUO WiFi to a power outlet using the USB cable and A/C adapter supplied.
5. The light on the device will blink orange while it registers to our calling system.
6. After a few minutes, the light will turn green and your phone will ring once.
7. After your phone rings, you can start making and receiving calls!